Interior Walls
Primer and interior wall paint options for homes, apartments, offices, hotels, schools, retail spaces, and public corridors.
Решения VERDA
Building Coating System Solutions
VERDA supports building projects with coating systems for interior walls, exterior facades, roofs, wet areas, floors, parking zones, and property maintenance.
Project Applications
Use this solution page when a building project needs interior wall coating, exterior facade coating, waterproofing support, floor protection, metal detail coating, or distributor supply support.
Exterior Facades
Exterior primer and wall coating options for facade refresh, color planning, and building envelope maintenance.
Roofs & Wet Areas
Waterproof coating options for roofs, balconies, exterior walls, utility rooms, and moisture-prone areas.
Floors & Parking
Floor coating options for garages, parking zones, commercial floors, ramps, service rooms, and circulation areas.
Metal Details
Protective coating options for rails, gates, frames, doors, service equipment, and routine repainting work.
Dealer Projects
Product range, packaging, sample, color, and document support for distributors and building material channels.
System Selection
Building projects often need more than one product category. VERDA helps match primers, wall coatings, waterproof coatings, floor coatings, and protective coatings to the project surface and target market.
Interior finish and primer selection
Exterior facade coating planning
Waterproofing support for moisture-risk areas
Floor and parking coating options
Key Issues
The right building coating path depends on surface condition, moisture exposure, outdoor weather, traffic level, maintenance needs, and channel requirements.
Surface Condition
Concrete, cement mortar, putty, gypsum board, existing coatings, and metal details may require different preparation and primer choices.
Moisture Exposure
Roofs, balconies, exterior walls, and wet areas need the right waterproof coating category before final finishing.
Outdoor Weather
Exterior facades require coating choices that fit sun, rain, dust, temperature change, and color expectations.
Traffic & Cleaning
Commercial floors and parking areas should be selected with traffic level, cleaning method, slope, and slip concerns in mind.
Maintenance Planning
Property projects need practical solutions for repainting, repair areas, access limits, and daily building operation.
Market Supply
Distributors may require packaging, samples, technical documents, color tools, and OEM/private label discussion.
VERDA Pathways
These pathways organize VERDA building coating products around common project conditions. Final selection should be confirmed by project surface and application requirements.
Interior Walls
Primer + Interior Wall Paint
For apartments, offices, hotels, schools, public areas, and renovation projects.
- NAB-130 Interior Wall Sealer Primer
- Closed Interior Wall Primer
- Zero VOC Interior Paint
- Odor-free Interior Paint
Exterior Facades
Exterior Primer + Wall Paint
For exterior walls, facade refresh, public projects, and dealer-led architectural coating programs.
- PETP-335 Sealing Exterior Primer
- PWP-331 Penetrating Exterior Transparent Primer
- WEW-4000 Weather-resistant Exterior Wall Paint
- SJW-5000 Self-Cleaning Exterior Paint
Waterproofing
Waterproof Coating Options
For roofs, exterior walls, balconies, utility spaces, and wet-area protection.
- BAYD101 Universal Waterproof Coating
- BAYD105 High Elastic Weather Resistant Rubber Waterproof Coating
- BAYD806 Invisible Waterproof Coating
- BAYD010 Polyurea Waterproof Coating
Floors & Parking
Floor Coating Options
For commercial floors, service corridors, garages, ramps, parking areas, and maintenance repainting.
- Waterborne Acrylic Coating
- Water-based Epoxy Coating
- Polyurethane Self-levelling Mortar System
- Polymer-Colored Anti-Slip Floor Paint
Project Workflow
Use the workflow below to prepare a clearer project brief before requesting product selection, samples, or quotation.
01
Review Project Area
Confirm whether the project covers interior walls, exterior facades, roofs, wet areas, floors, parking zones, or metal details.
02
Check Surface Condition
Identify surface material, existing coating, moisture risk, cracks, dusting, contamination, and repair requirements.
03
Select Product System
Choose the appropriate primer, wall coating, waterproof coating, floor coating, or protective coating pathway.
04
Confirm Sample & Color
Review finish target, color direction, sample needs, packaging, and technical document requirements.
05
Prepare & Apply
Clean and prepare the substrate, apply primer where required, then apply the selected coating system according to project guidance.
06
Inspect & Maintain
Check surface appearance, coverage continuity, touch-up areas, and maintenance needs after application.
Common Substrates
Substrate condition is the first decision point. Share photos and surface details with VERDA before final product recommendation.
Concrete / Cement Mortar
Common for interior walls, exterior walls, structural surfaces, and renovation projects.
Putty / Skim Coat
Often used before interior or exterior wall finishes; surface strength and dusting should be checked.
Gypsum Board
Typical for interior partitions, offices, hotels, schools, and commercial renovation spaces.
Existing Painted Surfaces
Maintenance repainting may require cleaning, repair, sanding, or primer selection before recoating.
Roof / Balcony / Wet Area
Moisture-risk areas can be matched with waterproof coating options according to project needs.
Concrete Floors
Garages, service rooms, commercial floors, ramps, and parking areas can require floor coating options.
Exterior Masonry
Facades and boundary walls need attention to exposure, repair areas, color, and primer choice.
Steel / Metal Details
Rails, gates, frames, doors, and facility details may require protective coating support.
Project Scenarios
These common scenarios help customers identify which building coating pathway may fit before requesting a quote or technical solution.
Case Type 01
Apartment Interior Renovation
Interior wall primer and wall paint selection for apartments, rental housing, offices, and public corridors.
Case Type 02
Commercial Facade Refresh
Exterior primer and wall coating support for retail buildings, schools, hotels, offices, and mixed-use properties.
Case Type 03
Roof & Balcony Waterproofing
Waterproof coating selection for moisture-risk areas before finishing or routine property maintenance.
Case Type 04
Parking & Commercial Floors
Floor coating support for garages, ramps, service spaces, commercial traffic areas, and maintenance repainting.
Verified Product Matrix
Use this matrix to identify the right VERDA product direction before requesting documents, samples, quotation, or a technical review.
Product
Weather-Resistant Exterior Paint WEW-01 | Satin Finish Exterior Wall Coating
Variant: Weather-resistant exterior paint
Product
Self-Cleaning Exterior Paint SJW-200 | Semi-Gloss Exterior Wall Coating
Variant: Self-cleaning exterior paint
Product
Anti-Fouling Exterior Paint AW-101 | Eggshell Finish Exterior Wall Coating
Variant: Anti-fouling exterior paint
Product
Formaldehyde-Free Interior Wall Paint JFC-003 | VERDA Healthy Coating
Variant: Formaldehyde-free interior wall paint
Product
Closed Interior Wall Primer NAB-130 | Strong Closure Interior Wall Coating
Variant: Closed interior wall paint
Product
Anti-Viral All-Effect Children's Interior Wall Paint VKC-998 | VERDA
Variant: Anti-viralall-effect children's interior wall paint
Product
Odor-Free and Mildew-Proof Interior Wall Primer PMW-01 | VERDA
Variant: Odor-free and mildew-proof interior wall primer
Product
Closed Exterior Primer PETP-335 | Strong Closure Water-Based Exterior Wall Primer
Variant: Closed exterior paint
Product
Alkali-Resistant Interior Wall Primer
Variant: Alkali-resistant interior wall primer
Project Support
VERDA provides coating selection support, product information, samples, branded packaging discussion, and export-ready communication for building coating projects.
Catalog and product range
TDS and SDS on request
Samples and color support
Distributor and OEM discussion
Project Request
Use one project brief for quotation, coating recommendation, sample discussion, product documents, or private label follow-up. This keeps the communication clear and helps VERDA respond with the right building coating pathway.
Project Information
Project type, country, target market, application area, estimated quantity, and expected delivery schedule.
Surface & Environment
Substrate type, current surface condition, indoor or outdoor exposure, moisture risk, traffic level, and maintenance needs.
Product Interest
Decorative coatings, waterproof coatings, floor paints, industrial protective coatings, or named products from the catalog.
Business Requirements
Distributor supply, contractor purchase, wholesale order, OEM/private label, packaging, sample, TDS, and SDS requirements.