Roofs & Exposed Surfaces
Waterproof coating options for concrete roofs, metal roofs, glass roof areas, exterior walls, balconies, and exposed building surfaces.
Решения VERDA
Building Waterproofing System Solutions
VERDA supports waterproofing projects for roofs, exterior walls, kitchens, bathrooms, balconies, pools, water tanks, basements, underground areas, and repair applications.
Project Applications
Use this solution page when the project needs moisture protection, roof waterproofing, wet-area treatment, long-term water exposure support, or repair of leakage-prone areas.
Kitchens & Bathrooms
Indoor waterproofing support for kitchens, bathrooms, sanitary rooms, wet walls, floors, and tile-adjacent areas.
Pools & Water Tanks
Waterproofing options for drinking water tanks, swimming pools, industrial pools, fire water pools, fish ponds, and aquaculture areas.
Basements & Underground
Support for underground structures, basements, pipe-root areas, damp surfaces, and moisture-prone concrete zones.
Repair & Leakage Treatment
Grouting, transparent repair, crack treatment, tile seepage repair, and leakage maintenance pathways.
Primer & Base Treatment
Primer and substrate reinforcement options to improve adhesion, base strength, and waterproofing layer performance.
System Selection
Waterproofing projects should be selected by application area, base condition, whether the surface is exposed, whether long-term water immersion is involved, and whether repair or primer reinforcement is required.
Roof and exposed waterproof coating
Kitchen, bathroom, and indoor wet-area waterproofing
Pool, tank, and water-retaining coating
Crack repair, grouting, and primer reinforcement
Key Issues
The right waterproofing path depends on leakage source, substrate condition, water exposure, surface movement, application environment, and expected maintenance cycle.
Leakage Source
Roofs, walls, pipe roots, cracks, joints, balconies, and underground areas need different repair and coating approaches.
Substrate Strength
Loose, dusty, cracked, hollow, contaminated, or damp substrates may require cleaning, repair, or primer treatment before coating.
Outdoor Exposure
Exposed roofs and facades may face sun, rain, temperature change, UV, ponding water, and long-term weathering.
Long-Term Water Contact
Pools, water tanks, fish ponds, and aquaculture areas require coatings selected for water-retaining conditions.
Cracks & Movement
Cracks, deformation, joints, and base movement require products with suitable flexibility, adhesion, or grouting support.
Application Conditions
Surface dryness, ventilation, temperature, rainy weather, dust, oil, and construction sequence affect waterproofing results.
VERDA Pathways
These pathways organize VERDA waterproofing products around common project conditions. Final selection should be confirmed by project substrate and application requirements.
Indoor Wet Areas
Kitchen & Bathroom Waterproofing
For bathrooms, kitchens, sanitary rooms, balconies, indoor walls, and floor waterproofing before finishing.
- ME-101 Kitchen & Bathroom Waterproof Coating
- ME-401 High-Strength Anti-Crack Waterproof Coating
- ME-701 Waterborne Epoxy Primer
- MA-706 Transparent Tile Repair Waterproof Glue
Roof & Exposed
Exposed Roof Waterproofing
For concrete roofs, metal roofs, glass roof areas, exterior walls, balconies, and exposed waterproofing repairs.
- MA-303 Red Rubber Roof Waterproof Coating
- MA-312 Silane Elastic Exposed Waterproof Coating
- ME-301 Ceramic Roof Waterproof Coating
- MA-504 Transparent Self-Cleaning Anti-Stain Gloss Varnish
Water-Retaining
Pools, Tanks & Aquaculture
For drinking water tanks, swimming pools, fish ponds, aquaculture ponds, industrial pools, and fire water pools.
- MA-104 Drinking Water Pool Waterproof Coating
- MA-707 Pool Waterproof Anti-Corrosion Coating
- MA-106 Aquaculture Pond Paint
- MA-607 Waterborne Polyurethane Waterproof Coating
Repair & Primer
Leakage Repair & Base Treatment
For seepage repair, crack grouting, tile leakage repair, base reinforcement, and primer preparation.
- MA-711 Polymer Polyurea Grouting Material
- ME-501 Roof Waterproof Anti-Seepage Primer
- ME-701 Waterborne Epoxy Primer
- MA-706 Transparent Waterproof Glue
Project Workflow
Use the workflow below to prepare a clearer project brief before requesting product selection, samples, or quotation.
01
Identify the Waterproofing Area
Confirm roof, wall, wet area, pool, basement, underground zone, crack, joint, pipe root, or repair area.
02
Inspect the Substrate
Check whether the surface is firm, flat, clean, dry, cracked, hollow, dusty, oily, damp, or previously coated.
03
Repair Details First
Repair cracks, corners, pipe roots, joints, hollow areas, and weak parts before large-area waterproof coating.
04
Select Primer or Base Treatment
Use primer or base reinforcement where the surface needs stronger adhesion, sealing, or anti-seepage preparation.
05
Apply Waterproofing Layers
Apply the selected coating, primer, grouting, or repair material according to the product pathway and project conditions.
06
Cure, Inspect & Protect
Allow curing, inspect continuity, avoid early water contact where required, and confirm the surface before handover.
Common Substrates
Substrate condition is the first decision point. Share photos and surface details with VERDA before final product recommendation.
Concrete Roofs
Flat roofs, exposed roofs, roof slabs, parapet areas, and roof repair zones.
Cement Mortar / Screed
Common base for wet areas, balconies, kitchens, bathrooms, roofs, and maintenance projects.
Metal Roofs
Metal roof surfaces and exposed roof zones requiring waterproofing and weather-resistant coating options.
Tile / Ceramic Surfaces
Tile joints, ceramic surfaces, kitchens, bathrooms, wall/floor seepage repair, and transparent repair applications.
Pools & Water Tanks
Drinking water tanks, swimming pools, industrial pools, fire water pools, fish ponds, and aquaculture ponds.
Basements / Underground
Underground rooms, pipe roots, damp walls, cracks, leakage points, and repair details.
Exterior Walls
Exterior walls, facade details, balconies, window edges, and moisture-prone wall areas.
Existing Waterproof Layers
Maintenance repainting or repair areas where adhesion, cleaning, and compatibility need review.
Project Scenarios
These common scenarios help customers identify which waterproofing pathway may fit before requesting a quote or technical solution.
Case Type 01
Kitchen & Bathroom Waterproofing
For indoor wet areas, wall/floor waterproofing, bathrooms, kitchens, sanitary rooms, and renovation projects.
Case Type 02
Exposed Roof Waterproofing
For concrete roofs, metal roofs, glass roof areas, balconies, and outdoor waterproofing maintenance.
Case Type 03
Water Tank & Pool Projects
For drinking water tanks, swimming pools, industrial pools, fire water pools, fish ponds, and water-retaining structures.
Case Type 04
Leakage Repair & Grouting
For building cracks, tunnels, underground pipes, damp repair, leakage reinforcement, and maintenance projects.
Verified Product Matrix
Use this matrix to identify the right VERDA product direction before requesting documents, samples, quotation, or a technical review.
Product
Odor-Free and Mildew-Proof Interior Wall Primer PMW-01 | VERDA
Variant: Odor-free and mildew-proof interior wall primer
Project Support
VERDA supports waterproofing projects with product selection, product materials, samples, branded packaging discussion, and export-ready communication.
Waterproofing product range
Product sheets and documents
Samples and application support
Distributor and OEM discussion
Project Request
Use one project brief for quotation, technical recommendation, sample discussion, product documents, or private label follow-up. This avoids repeated inquiry steps and helps VERDA respond with a clearer waterproofing pathway.
Project Information
Project type, country, target market, application area, estimated quantity, and expected delivery schedule.
Waterproofing Area
Roof, exterior wall, kitchen, bathroom, pool, tank, basement, underground area, pipe root, crack, or repair zone.
Surface Condition
Substrate type, current condition, cracks, dampness, old coating, contamination, and exposure environment.
Business Requirements
Distributor supply, contractor purchase, wholesale order, OEM/private label, packaging, sample, TDS, and SDS requirements.