Flues & Exhaust Pipes
Heat-resistant coating pathways for smoke ducts, exhaust pipes, flues, fireplace doors, and high-temperature metal surfaces.
Soluciones VERDA
High-Temperature Protective Coating Systems
VERDA supports heat-resistant coating projects for flues, exhaust pipes, chimneys, heating equipment, metallurgical machinery, thermal power equipment, electronic insulation components, and easy-clean heat-exposed metal surfaces.
Application Areas
Use these areas to match customer projects with distributor sales opportunities, OEM/private label positioning, or contractor application needs before discussing product selection, samples, temperature exposure, documents, and quotation.
Chimneys & Heating Equipment
Product selection support for chimneys, heating equipment, sauna stoves, heat ducts, and industrial hot metal equipment.
Metallurgy & Thermal Power
High-temperature coating discussion for metallurgical machinery, petroleum, chemical, thermal power, textile, printing, and dyeing equipment.
Electrical Insulation Parts
Insulating coating support for electronic components, mechanical equipment, new energy vehicle electrical parts, and battery accessories.
Easy-Clean Heat Surfaces
High-temperature easy-clean and non-stick coating route for chimneys, pipes, heating equipment, and heat-exposed industrial equipment.
OEM & Industrial Maintenance
Quote-ready support for distributors, OEM/private label buyers, and contractors handling high-temperature repair or production coating projects.
System Selection
High-temperature coating selection should start with the actual service temperature, whether exposure is dry heat, whether the surface needs insulation or easy-clean performance, and whether the project is new production or maintenance repainting.
BLA-400 for black matte silicone coating up to +400°C dry heat
BLA-600 for aluminum silicone coating up to +650°C dry heat on bare steel
800°C high-temperature paint for very high-temperature industrial equipment
BAYD-JY20B and BAYD-HR900 for insulation or easy-clean special functions
Key Selection Questions
For accurate recommendation, confirm the buyer role, application area, peak and continuous temperature, substrate, surface preparation method, drying or curing condition, target color, application method, and required documents.
Service Temperature
Confirm whether the project needs +400°C dry heat, +650°C dry heat, 800-950°C resistance, insulation, or easy-clean performance.
Dry Heat vs. Other Exposure
BLA-400 and BLA-600 temperature ratings are dry heat references. Water, oil, chemicals, humidity, and thermal cycling should be reviewed separately.
Surface Preparation
Steel surfaces may need cleaning, degreasing, salt removal, blast cleaning to Sa2.5, phosphating, or roughening depending on the product route.
Film Thickness & Cure
High-temperature systems are thin-film products. Target dry film thickness, natural drying, heat curing, and final hardness timing must be confirmed.
Application Method
Spray, airless spray, air spray, brush, roller, compressed air spray, and electrostatic spray are product-specific and should not be treated as interchangeable.
Special Functions
Electrical insulation, non-stick behavior, cleanability, weathering resistance, and adhesion on metal substrates should be matched to the exact product.
Recommended Product Systems
These systems group the verified high-temperature products by customer use case, distributor selling point, OEM positioning, and contractor project requirement.
400°C Silicone Path
Black Matte Heat-Resistant Finish
For heat-exposed steel surfaces such as fireplace doors, flues, exhaust pipes, sauna stoves, and hot metal equipment.
- BLA-400 Organic Silicone High-Temperature Coating
- Dry heat resistance up to +400°C
- Black, matte, one-component coating
- Recommended dry film thickness: 15 microns
650°C Silicone Aluminum Path
Aluminum Metallic Heat Protection
For high-temperature steel exteriors and heat equipment where aluminum metallic appearance and higher dry-heat resistance are required.
- BLA-600 Organic Silicone High-Temperature Coating
- Dry heat resistance up to +650°C on bare steel
- Aluminum color with metallic gloss
- Recommended dry film thickness: 25 microns
Very High-Temperature Path
800-950°C Industrial Equipment Protection
For mechanical equipment and steel components in metallurgy, petroleum, chemical, thermal power, textile, and printing or dyeing equipment.
- 800°C High-Temperature Resistant Paint
- Modified silicone resin with high-temperature pigments
- Selectable color, matte finish
- Recommended dry film thickness: 20-35 microns
Functional Heat Path
Insulation or Easy-Clean Heat Surface
For electronic parts, new energy components, chimneys, pipes, heating equipment, and heat-exposed surfaces requiring special function.
- BAYD-JY20B High-Temperature Insulating Coating
- BAYD-HR900 High-Temperature Easy-Clean Coating
- Spray routes for controlled 15-25 micron film
- Function-led selection by insulation, non-stick, or cleanability need
Application Workflow
Use this workflow to prepare a clearer high-temperature coating brief before requesting product selection, samples, quotation, OEM/private label discussion, or contractor recommendation.
01
Confirm Temperature Profile
Define peak temperature, continuous temperature, dry heat condition, thermal cycle, heating frequency, and whether insulation or easy-clean function is required.
02
Review Substrate
Confirm steel, zinc silicate coated steel, aluminum, metal component, electronic component, pipe, chimney, heating equipment, or repaired old coating.
03
Prepare the Surface
Remove oil, grease, salt, dirt, dust, rust, and loose coating. Use blast cleaning, phosphating, degreasing, or roughening where the selected product requires it.
04
Prepare the Coating
Stir, redisperse, thin, filter, or mix according to product requirements. JY20B and HR900 should be filtered through 150 mesh after redispersion.
05
Apply Thin Film
Apply by the verified method for the selected product, such as airless spray, air spray, brush, roller, compressed air spray, or electrostatic spray.
06
Dry, Cure & Inspect
Confirm dust dry, touch dry, recoat window, heat-curing condition, final hardness timing, appearance, adhesion, and readiness for service.
Suitable Substrates
Substrate and surface preparation drive the recommendation. Share photos, current coating condition, temperature profile, and application method before final selection.
Blast-Cleaned Steel
Steel surfaces prepared to Sa2.5 where high-temperature silicone coatings or very high-temperature paint are being considered.
Zinc Silicate Coated Steel
BLA-400 and BLA-600 can be discussed with zinc silicate surfaces where cleaning, damage repair, and recoat window are confirmed.
Flues & Exhaust Pipes
Smoke ducts, exhaust pipes, fireplace doors, sauna stoves, and hot steel parts exposed to dry heat.
Industrial Hot Equipment
Metallurgy, petroleum, chemical, thermal power, textile, printing, dyeing, and power-related mechanical equipment.
Electronic Components
Electronic industrial parts, mechanical equipment, new energy vehicle electrical components, and battery accessories requiring insulation.
Chimneys & Pipes
Industrial chimneys, pipelines, heating equipment, and metal substrates requiring high-temperature cleanability or non-stick performance.
Aluminum Roughened Surfaces
Selected JY20B and HR900 applications describe roughening aluminum substrates with 60#-100# aluminum oxide to Ra 2.0-3.5 microns.
Maintenance Repainting
Repair or repainting projects where old coating condition, cleaning feasibility, adhesion, and heat exposure must be reviewed first.
Application Scenarios
Use these scenarios to choose a practical product direction before requesting quotation, samples, OEM/private label discussion, or technical support.
Case Type 01
Flues, Exhaust Pipes & Heat Ducts
For fireplace doors, flues, exhaust pipes, sauna stoves, and hot metal surfaces requiring silicone high-temperature coating.
Case Type 02
Metallurgy & Thermal Equipment
For high-temperature protection of mechanical equipment and steel components in metallurgy, petroleum, chemical, thermal power, textile, and printing or dyeing equipment.
Case Type 03
Electrical Insulation Components
For electronic components, mechanical equipment, new energy vehicle electrical parts, and battery accessories requiring heat resistance and insulation.
Case Type 04
Easy-Clean Heat Equipment
For chimneys, pipes, heating equipment, and metal surfaces requiring high-temperature resistance, non-stick behavior, and easy-clean performance.
Product Selection Matrix
Use these product names when requesting quotation, samples, TDS, SDS, technical recommendation, OEM/private label cooperation, or distributor catalog materials.
BLA-400
Organic Silicone High-Temperature Coating
Heat-resistant silicone resin coating for steel surfaces exposed to high temperature. Dry heat resistance up to +400°C. Black, matte, one-component. Solids by mass 19%, volume solids 34%, density 1.1 kg/L. Recommended dry film thickness 15 microns; theoretical coverage 12.7 m²/L.
BLA-600
Organic Silicone High-Temperature Coating
Heat-resistant silicone aluminum coating for high-temperature steel exteriors. Dry heat resistance up to +650°C on bare steel and +400°C on zinc silicate coating. Aluminum color, metallic gloss, one-component. Solids by mass 51%, volume solids 34%, density 1.2 kg/L. Recommended dry film thickness 25 microns; theoretical coverage 13.6 m²/L.
800°C Paint
High-Temperature Resistant Paint
Modified silicone resin coating with high-temperature resistant pigments and organic solvents. Used for high-temperature protection of mechanical equipment and steel components in metallurgy, petroleum, chemical, thermal power, textile, printing and dyeing, and power equipment. Temperature resistance listed up to 800-950°C. Color selectable, matte. Volume solids 35%; recommended dry film thickness 20-35 microns.
BAYD-JY20B
High-Temperature Insulating Coating
Inorganic high-temperature insulating coating composed of multiple polymer materials. Designed for heat-resistant and insulating scenarios, including electronic components, mechanical equipment, new energy vehicle electromagnetic electrical parts, and battery accessories. Insulation reaches H-class reinforced type, withstands 20,000V, and temperature resistance is listed up to 800°C. Black liquid, weight solids 25.5-35.5%, viscosity 20.0-45.0 seconds, shelf life 6 months.
BAYD-HR900
High-Temperature Easy-Clean Coating
Self-drying one-component silicone fluorinated resin coating for high-temperature, corrosion-resistant, non-stick, and easy-clean applications. Used for industrial equipment such as chimneys, pipes, and heating equipment, with good adhesion to various metal substrates. Temperature resistance is listed up to 800°C; weathering performance includes 5000h xenon aging. Gray liquid, weight solids 30.5-35.5%, viscosity 20.0-45.0 seconds, shelf life 6 months.
Commercial & Technical Support
VERDA supports distributors, OEM/private label customers, and contractors with high-temperature product selection, sample discussion, document support, application route review, and export-ready communication.
High-temperature product route selection
TDS, SDS, sample and color discussion
Insulation and easy-clean project screening
Distributor, contractor and OEM/private label support
Inquiry Requirements
Send one project brief for quotation, samples, product recommendation, documents, OEM/private label, or contractor follow-up. A clearer brief helps VERDA recommend the right high-temperature coating route faster.
Project Information
Country, buyer role, project type, target market, estimated quantity, color requirement, document needs, and schedule.
Temperature Profile
Peak temperature, continuous temperature, dry heat condition, thermal cycle, heating frequency, and expected service environment.
Substrate & Surface
Steel, zinc silicate coated steel, aluminum, electronic component, pipe, chimney, heating equipment, old coating, rust, oil, dust, and surface preparation method.
Business Requirements
Distributor supply, contractor purchase, wholesale order, OEM/private label, samples, TDS, SDS, color, packaging, and export needs.