01
Walls & Facades
Wall and facade coating guidance
For walls, ceilings, facades, public spaces, and decorative areas where appearance, color, weathering, stain resistance, or easier maintenance matters.
Application Guides
Explore surface assessment, application methods, curing, and handover essentials to support coating planning and on-site work.
Coating Guides by Application
Find application guidance for walls, floors, waterproofing, metal protection, road marking, and maintenance repainting.
02
Floors
Floor coating application guidance
For warehouses, factories, parking areas, workshops, corridors, and commercial floors where load, abrasion, cleaning, and return-to-service timing are important.
03
Waterproofing
Waterproofing application guidance
For moisture protection, roof waterproofing, bathroom or balcony treatment, pool area discussion, or repair of leakage-prone areas.
04
Metal Protection
Metal protection application guidance
For steel structures, machinery, tanks, pipes, work platforms, transport equipment, and maintenance repainting where corrosion or chemical exposure is a concern.
05
Traffic Marking
Traffic marking application guidance
For parking lines, traffic markings, directional arrows, safety zones, and road surfaces where visibility, drying speed, and traffic return matter.
06
Maintenance
Maintenance and repainting guidance
For repainting, localized repair, facility maintenance, color refresh, and phased work where the existing coating condition affects the next step.
From Surface Assessment to Handover
Review substrate conditions, coating systems, application methods, and curing requirements step by step, and maintain application and handover records.
Define the project area
Clarify the application area, surface type, exposure, performance goal, and decision stage before discussing products.
Review the surface condition
Check dryness, strength, cracks, contamination, old coating layers, rust, roughness, and repair needs.
Choose the system route
Match primer, build layer, functional layer, and finish coat to the surface and expected service condition.
Confirm the application method
Align roller, brush, spray, trowel, squeegee, line marking, or other tools with the available construction window.
Plan curing and return to service
Allow suitable curing time before traffic, cleaning, water exposure, immersion, or full service conditions.
Keep handover records
Keep approved samples, batch references, cleaning guidance, touch-up material, and maintenance expectations clear.
Key Application Conditions
Review surface preparation, temperature, humidity, mixing ratios, film thickness, and work schedules against product requirements before application.
Surface preparation
Cleaning, grinding, sanding, blasting, rust removal, repair, and moisture checks should match the selected coating route.
Temperature and humidity
Application temperature, surface temperature, humidity, dew point, rain risk, and ventilation can change the work window.
Mixing and pot life
Two-component products should be mixed according to the stated ratio and used within the available pot life.
Film thickness
Wet film and dry film thickness affect coverage, protection, appearance, curing, and long-term performance.
Tools and crew
Brush, roller, airless spray, spray gun, trowel, squeegee, or marking equipment should match the product and finish target.
Area closure
Traffic control, dust control, access route, ventilation, and phased construction planning reduce avoidable site problems.
Color and sample approval
Color, gloss, texture, anti-slip feel, and sample board approval should be confirmed before bulk application.
Inspection and records
Photos, batch references, application date, weather, surface preparation, and final approval notes help future maintenance.
Before Handover
Confirm curing and return-to-service times, cleaning methods, repair materials, and maintenance requirements, and prepare project handover documents.
Curing period
Confirm when the surface can accept foot traffic, vehicles, cleaning, water exposure, or full service use.
Cleaning method
Agree on cleaning chemicals, tools, frequency, and restrictions before the coated area enters daily use.
Touch-up material
Keep the correct product, color, batch reference, and repair method available for future localized work.
Approved sample
Retain the approved color sample, sample board, or mock-up reference when appearance matters commercially.
Maintenance cycle
Plan inspection, cleaning, repainting, waterproofing review, or line refreshing according to the service environment.
Document pack
Keep the relevant catalog, TDS, SDS, application note, and approval file together for future project reference.
Details for Application Support
Share substrate conditions, exposure, performance goals, and application plans so VERDA can support product selection, technical documentation, and sample requests.
Project and surface
- Application area: wall, floor, roof, wet area, steel, road marking, equipment, or maintenance repair
- Substrate type, age, strength, moisture, cracks, rust, contamination, or old coating condition
- Indoor or outdoor exposure, UV, rain, water immersion, chemical contact, temperature, and cleaning method
Performance and method
- Traffic level, load, abrasion, anti-slip need, hygiene need, or return-to-service timing
- Target finish: color, gloss, texture, transparency, anti-slip feel, or decorative effect
- Preferred application method: brush, roller, spray, trowel, squeegee, or line marking equipment
- Available construction window, site temperature, humidity, ventilation, and weather limitations
Documents and timing
- Required documents: catalog, TDS, SDS, certificates, application notes, or project approval file
- Sample need: color card, wet sample, dry sample, sample board, mock-up, or retained approval sample
- Confirm the application checklist before requesting project support.