Protective coating pathways for coastal frames, bridges, platforms, steel supports, and exposed structural steel.
Marine coating systems
VERDA provides protective coating solutions for coastal steelwork and port facilities exposed to salt spray and moisture.
Application Scenarios
Explore coating solutions for coastal facilities, tank exteriors and pipelines, from new construction to refurbishment.
Epoxy primer, epoxy intermediate, and polyurethane topcoat options for cranes, conveyors, handling equipment, and port-related steel assets.
Coating systems for storage tank exteriors, pipework, pressure equipment, and steel surfaces exposed to coastal weathering.
Product selection support for interior ship steel areas where selected VERDA products match the documented certificate scope.
Maintenance coating options for damaged coatings, hand-prepared steel, repair areas, wet service exposure, and difficult-to-clean assets.
Epoxy zinc-rich and high-build systems for demanding steel projects such as offshore-related structures, refineries, power plants, and bridges.
Recommended Product System
Explore coating systems that combine corrosion protection, weather resistance and finish retention.
Epoxy zinc-rich primer for cathodic protection on prepared steel High-build epoxy primer or MIO midcoat for barrier reinforcement Epoxy resin maintenance coating for repair and wet-service steel Polyurethane topcoat for coastal weathering and appearance retention
Common Pain Points
Assess salt exposure, moisture, wear and surface preparation constraints to identify your project’s protection priorities.
Salt & Coastal Weathering
Coastal steel needs a coating system that considers harsh weather, moisture, chloride exposure, gloss retention, and color retention.
Splash & Wet Exposure
Pontoons, ballast tank areas, inside hull areas, water-immersed or buried steel, and splash-prone zones need careful epoxy selection.
Surface Preparation Limits
Maintenance work often includes hand-prepared steel, old coating, rust, welding damage, and surfaces that are difficult to clean perfectly.
Abrasion & Chemical Stress
Conveyors, ports, tank exteriors, processing equipment, and industrial steel may face mechanical wear and chemical stress.
Appearance Retention
Exterior tanks, equipment, bridges, and visible steel assets often require stable color, gloss, cleanability, and non-chalking topcoat behavior.
Documentation Scope
Some products include CCS or NORSOK-related documentation. Match the product and certificate scope to the actual project before specification.
VERDA Pathways
Compare coating systems to find the right fit for your exposure conditions, surface condition and maintenance needs.
Prepared Steel in Demanding Environments
For steel surfaces exposed to harsh weather where zinc-rich epoxy primer and durable topcoat selection are required.
- EZ-D99 Epoxy Zinc-Rich Primer
- MIO-Z27 High Build Epoxy MIO Midcoat
- PUR-PC50 or PUR-PC80 Polyurethane Coating
- Suitable for demanding steel projects such as offshore-related assets, refineries, power plants, and bridges
Barrier Primer and Intermediate Coat
For steel, zinc, and aluminum surfaces where high film build, adhesion, and recoating flexibility are important.
- EZP-D15 Epoxy Primer
- EZP-D17 High Build Epoxy Primer
- MIO-Z27 High Build Epoxy MIO Midcoat
- PUR-M50 or PUR-M90 Polyurethane Topcoat
Repair, Repaint and Splash-Prone Steel
For damaged coatings, hand-prepared steel, wet exposure, water immersion, buried steel, and maintenance repainting.
- EAC-RM40 Epoxy Resin Coating
- EZP-WH200 Epoxy Resin Maintenance Coating
- EZP-WH300 Epoxy Resin Maintenance Coating
- Use for repair conversations where steel cleaning and exposure are clearly defined
Weathering, Gloss and Color Retention
For exterior steel, tank exteriors, shipping and transport equipment, machinery, and visible assets requiring durable finish quality.
- PUR-M20 Matte Polyurethane Coating
- PUR-M50 Semi-Gloss Polyurethane Coating
- PUR-M90 High-Gloss Polyurethane Coating
- PUR-PC50 or PUR-PC80 high-solid polyurethane options
Project Workflow
Follow the key steps from site assessment and system selection to application, inspection and maintenance.
Confirm the Asset
Define whether the project involves coastal steel, tank exterior, pipeline, bridge, port equipment, ship interior steel, or maintenance repainting.
Review Exposure
Confirm marine atmosphere, splash exposure, wet service, chemical stress, abrasion, heat exposure, cleaning frequency, and appearance requirements.
Inspect Surface Condition
Check new steel, galvanized or aluminum surface, hand-prepared steel, old coating, rust, oil, dust, welding damage, and repair areas.
Select Primer and Midcoat
Choose epoxy zinc-rich primer, high-build epoxy primer, MIO epoxy midcoat, or epoxy resin coating based on project exposure and substrate.
Apply Topcoat System
Select matte, semi-gloss, high-gloss, high-solid, or color-matched polyurethane topcoat where weathering and appearance retention are required.
Cure, Inspect & Maintain
Check coating continuity, adhesion, appearance, film build target, repair points, and maintenance plan before handover or service exposure.
Suitable Substrates
Choose suitable preparation methods and compatible coating systems based on your substrate and existing coating condition.
Steel structures, tank exteriors, pipe systems, frames, bridges, cranes, conveyors, and fabricated steel components.
Selected epoxy products document good adhesion to steel, zinc, and aluminum surfaces when the surface condition is suitable.
Maintenance repainting surfaces where practical cleaning, rust removal, and adhesion review are required before coating.
Selected products carry documented ship interior coating scope; confirm certificate applicability before project specification.
Wet-service epoxy coating discussion for steel structures in wet environments such as pontoons, ballast tanks, and inside ship hulls.
Storage tank exteriors and pressure equipment exposed to coastal weathering, cleaning, temperature change, and appearance requirements.
Port cranes, conveyors, handling equipment, and machinery exposed to abrasion, weathering, and industrial service conditions.
Some epoxy products include concrete surface use or CE-marked concrete application in the catalogue; confirm scope before use.
Typical Project Scenarios
Explore coating options for coastal steel protection, equipment repairs and on-site refurbishment.
Case Type 01
Coastal Steel Structure Protection
For frames, bridges, platforms, and steel supports requiring primer, barrier layer, and weather-resistant finish selection.
Suggested path: EZ-D99 + MIO-Z27 + PUR-PC50 / PUR-PC80
Case Type 02
Tank Exteriors & Pipe Assets
For storage tank exteriors, pipework, pressure equipment, and visible steel assets exposed to coastal weathering.
Suggested path: EZP-D17 + MIO-Z27 + PUR-M50 / PUR-M90
Case Type 03
Splash-Prone Maintenance Steel
For damaged coatings, hand-prepared steel, wet exposure, and repair areas where maintenance epoxy products are needed.
Suggested path: EAC-RM40 / EZP-WH200 / EZP-WH300
Case Type 04
Workshop or Field Application
For coating stations, fabrication workshops, and field repainting where application method, drying speed, gloss, and color matching matter.
Suggested path: EZP-D15 / EZP-D17 + PUR-M20 / PUR-M50 / PUR-M9012 Selected Products
Compare product features, applications and technical specifications to find the right fit for your project.
Epoxy Primer
Two-component polyamide-cured high-build epoxy primer containing zinc phosphate. Recommended for bridges, transportation equipment, cranes, steel struts, conveyors, steel structures, machinery, and equipment. Includes CCS certificate No. GZ21PWA00013 for ship interior surfaces.
High Build Epoxy Primer
Two-component modified epoxy resin coating with anti-corrosion pigments. Used as primer or intermediate coat on steel, zinc, and aluminum surfaces exposed to climatic, mechanical, and chemical stress. Used in NORSOK approved systems as an intermediate coating on surfaces exposed to marine conditions.
Epoxy Zinc-Rich Primer
Two-component polyamide-cured zinc-rich epoxy resin coating. Prequalified in NORSOK System 1 for demanding applications such as offshore environments, refineries, power plants, and bridges, with zinc content exceeding ISO 12944-5 requirements.
High Build Epoxy MIO Midcoat
Two-component polyamide-cured epoxy coating with micaceous iron oxide. Suitable for bridges, storage tank outer walls, steel frames, conveyors, tubular bridges, and steel equipment. Used as primer or intermediate coat in epoxy and polyurethane systems exposed to severe weathering and spatter.
Epoxy Resin Coating
Two-component modified epoxy resin coating for building frames, tubular bridges, conveyors, ship hulls, steel structures, and equipment. Used for steel structures in wet environments such as pontoons, ballast tanks, inside ship hulls, underground or underwater applications, and severe splash exposure.
Epoxy Resin Maintenance Coating
Two-component high-solids aluminum-pigmented modified epoxy maintenance coating. Used for repairing shipping and installation damage, hand-prepared steel, steel immersed in water, buried steel, bridges, reservoirs, and difficult-to-clean steel structures or equipment.
Epoxy Resin Maintenance Coating
Two-component high-solids modified colorable epoxy maintenance coating. Used for repair of shipping and installation damage, hand-prepared steel, water-immersed or buried steel, hydropower station steel, and difficult-to-clean steel structures or equipment.
Matte Polyurethane Coating
Two-component matte polyurethane coating with anti-corrosion pigments and aliphatic isocyanate hardener. Recommended for shipping and transport equipment, tank exteriors, steel frames, steel structures, machinery, and equipment. Includes CCS certificate No. GZ21PWA00013 for ship interior surfaces.
Semi-Gloss Polyurethane Coating
Durable non-chalking semi-gloss polyurethane coating with aliphatic isocyanate hardener. Recommended for shipping and transport equipment, tank exteriors, steel frames, steel structures, machinery, and equipment; used as topcoat in epoxy and polyurethane systems exposed to weathering or chemical stress.
High-Gloss Polyurethane Coating
High-gloss polyurethane coating with aliphatic isocyanate hardener. Recommended for shipping and transport equipment, tank exteriors, steel frames, steel structures, machinery, and equipment. Used as topcoat for epoxy resin systems exposed to severe weathering and chemical stress.
Semi-Gloss Polyurethane Coating
High-solid semi-gloss polyurethane coating for tank exteriors, steel structure buildings, and other steel structures. Prequalified in NORSOK System 1 for offshore environments, refineries, power plants, and bridges.
High-Gloss Polyurethane Coating
High-solid high-gloss polyurethane coating for shipping and transport equipment, storage tank exteriors, steel frames, steel structures, machinery, and equipment. Designed for harsh environments with weathering, abrasion, gloss, and color-retention requirements.
Final product selection should be confirmed against project exposure, surface preparation, local application conditions, and the current TDS/SDS package.
Technical Solution Support
VERDA offers coating advice, technical documents and samples for project buyers, distributors and private-label partners.
Epoxy and polyurethane system matching TDS, SDS, sample and color support Maintenance repainting project review Distributor, contractor and OEM/private label support
Get a Quote
Share your project requirements and estimated quantities for coating recommendations and a quote.
Country, buyer role, project type, asset location, target market, estimated quantity, color requirement, gloss target, and schedule.
Coastal steel structure, port equipment, tank exterior, pipe, bridge, ship interior steel area, splash-prone steel, or maintenance repainting.
New steel, galvanized or aluminum surface, hand-prepared steel, old coating, rust, oil, dust, welding damage, repair area, and exposure level.
Distributor supply, contractor procurement, OEM/private label, samples, TDS, SDS, certificate scope, and export packaging needs.
01Request a Quote
For price, quantity, shipping, samples, and purchasing discussion.
02Ask for Technical RecommendationFor primer, midcoat, polyurethane finish, substrate, old coating, exposure, and application method review.
03Send Project DetailsFor asset photos, surface condition, service environment, selected product interest, buyer role, and target schedule.