Center lines, edge lines, lane separation, directional arrows, crosswalk areas, and traffic guidance markings.
Road Marking Coating Systems
VERDA provides coating solutions for roads and parking areas, helping create clear markings, guide traffic and support safer movement for vehicles and pedestrians.
Project Applications
Select the marking system by road surface, traffic load, reopening schedule, color requirement, visibility requirement, and application method.
Parking bay lines, arrows, numbering areas, ramps, garage lanes, pedestrian paths, and safety zones.
Factory roads, warehouse passages, forklift routes, loading areas, logistics parks, and internal traffic organization.
Port lanes, yard routes, dock traffic areas, container handling routes, and vehicle circulation markings.
Schools, hospitals, retail areas, business parks, service roads, and high-recognition pedestrian or vehicle guidance.
Guardrails, curbs, barriers, tunnel edges, warning posts, and vertical safety surfaces requiring high visibility.
System Selection
Traffic marking projects often need a balance between fast application, clean line edges, durable recognition, glass bead compatibility, and field conditions such as asphalt bleeding, concrete surface strength, humidity, and road temperature.
Waterborne acrylic road marking paint Two-component screed, spray, vibration, and structured systems Glass bead compatible reflective marking Parking, road, industrial, and vertical safety marking
Key Issues
Choose marking solutions suited to your road surface, traffic demands and application conditions, with durability, visibility and reopening times in mind.
Fast Reopening
Roads, parking lots, ports, and industrial routes may need short closure time and controlled drying before traffic is released.
Asphalt / Concrete Adhesion
Asphalt and Portland cement concrete require clean, dry, solid surfaces and suitable preparation before marking.
Wear & Traffic Load
Vehicle movement, turning, parking, cleaning, and outdoor exposure can influence the marking system and film thickness.
Bleeding Control
Asphalt surfaces may create discoloration risk, so anti-bleeding performance and surface condition should be reviewed.
Night / Rain Visibility
Projects requiring night recognition or wet-weather guidance may require glass beads, raised profiles, or reflective marking choices.
Color Recognition
White, yellow, red, green, blue, black, and custom colors should match the local traffic marking purpose and project specification.
VERDA Pathways
Explore VERDA coating solutions for roads, parking areas and industrial sites, supporting traffic guidance, zone identification and safety signage.
Regular Temperature Marking Paint
For routine road, parking, municipal, and facility marking projects where a conventional line marking coating is specified.
- Supports common marking colors
- For roads, parking areas, airports, docks, and passages
- Works with professional marking equipment planning
WTP-RM100 Waterborne Road Marking Paint
Single-component, quick-dry waterborne acrylic marking paint for asphalt and Portland cement concrete road marking.
- 100% cross-linked acrylic polymer system
- For roads, parking, municipal traffic, and industrial parks
- Can be used with road reflective glass beads
Screed Marking Paint
For screed-applied line marking projects that need a two-component marking pathway and controlled film build.
- Used for professional marking machine application
- Suitable for projects requiring higher profile lines
- Supports controlled line thickness and professional application planning
Vibration Marking Paint
For raised or vibration marking lines where drivers need tactile warning, lane guidance, or enhanced route recognition.
- Suitable for special traffic warning lines
- Used on selected roads, lane edges, and guidance areas
- Supports raised profile and construction method planning
Spray Marking Paint
For spray-applied two-component road marking projects requiring clean edges, production speed, and professional equipment.
- Supports line marking and road guidance applications
- Suitable for equipment-based application planning
- Supports spray setting and project workflow coordination
Structured Marking Paint
For structured marking profiles where visibility, drainage, reflective effect, and line recognition are important.
- Used for structured or profiled marking lines
- Can support reflective marking projects
- Supports structure height and glass bead planning
Fluorescent Coating
For visual warning, safety reminder, and high-recognition coating areas where brighter color guidance is required.
- Used for warning and attention areas
- Supports road-island, separation, and safety marking areas
- Useful for color-driven warning and guidance surfaces
Colored Vertical Reflective Marking Paint
For vertical traffic safety markings on curbs, barriers, guardrails, tunnel edges, warning areas, and roadside facilities.
- Supports vertical warning and reflective recognition
- Used where flat road marking is not enough
- Supports substrate and reflective requirement planning
Project Workflow
Explore the key steps in your marking project, from planning and surface preparation to application and reopening to traffic.
Confirm Layout
Review line type, color, width, thickness, route, traffic control plan, glass bead requirement, and reopening schedule.
Inspect the Road
Check asphalt or concrete condition, old markings, oil, dust, loose particles, surface strength, moisture, and contamination.
Clean & Dry
Remove water, mud, sand, dust, loose coating, and oil. The road surface should be clean, dry, solid, and above the dew point.
Prepare Product
Stir thoroughly before use. For WTP-RM100, clean water can be used for equipment cleaning and limited viscosity adjustment when needed.
Apply Marking
Use road marking spray, mechanical spray, or professional marking equipment. Apply reflective glass beads immediately while the film is wet when specified.
Cure & Reopen
Protect the marking until it is ready for traffic. Drying depends on temperature, humidity, ventilation, film thickness, and road temperature.
Common Substrates
Choose surface preparation methods and marking solutions suited to your substrate, surface condition and traffic demands.
Municipal roads, industrial roads, parking routes, logistics parks, and outdoor traffic lanes.
Concrete roads, factory passages, parking areas, yards, ramps, and service roads after suitable surface preparation.
Existing markings should be checked for adhesion, chalking, peeling, contamination, and compatibility before recoating.
Garage lanes, parking bay lines, directional arrows, pedestrian paths, safety areas, and numbered zones.
Forklift lanes, loading areas, warehouse passages, internal factory roads, and logistics circulation routes.
Dock routes, container yards, heavy vehicle passages, and managed site traffic markings.
Greenways, school zones, warning areas, pedestrian areas, cycle lanes, and commercial site guidance surfaces.
Curbs, barriers, guardrails, tunnel edges, warning posts, and facility surfaces requiring reflective recognition.
Project Scenarios
From parking lots to public roads, explore VERDA marking solutions for traffic guidance, nighttime visibility and clearly defined zones.
Case Type 01
Parking Lot Line Marking
For parking bay lines, arrows, pedestrian guidance, ramps, and garage traffic organization.
Suggested path: WTP-RM100 or selected acrylic marking system
Case Type 02
Municipal Road Marking
For lane lines, road edges, arrows, crosswalk-related marking, and fast traffic reopening planning.
Suggested path: Waterborne or two-component marking system
Case Type 03
Reflective Safety Guidance
For routes requiring night recognition, glass bead compatibility, reflective performance, and safety guidance.
Suggested path: Reflective marking with glass bead support
Case Type 04
Colored Traffic Surface
For greenways, school zones, warning areas, commercial routes, and public site traffic guidance.
Suggested path: Colored marking or high-recognition coating systemVerified Product Matrix
Find VERDA traffic marking products for your project. Request technical documents, samples and quotes, or explore custom colors, packaging and private-label options.
Regular Temperature Marking Paint
General line marking option for roads, parking areas, municipal routes, and traffic guidance applications.
Waterborne Acrylic Road Marking Paint
Waterborne, single-component, 100% cross-linked acrylic marking paint for asphalt and Portland cement concrete surfaces. VOC ≤10 g/L, 75-85 KU, no-pick-up dry ≤10 min, 18.93L pail.
Two-Component Screed Marking Paint
Two-component marking pathway for screed-applied line marking and high-build marking work.
Two-Component Vibration Marking Paint
Raised or vibration marking option for tactile warning and enhanced traffic recognition requirements.
Two-Component Spray Marking Paint
Spray-applied two-component option for professional marking equipment and road line projects.
Two-Component Structured Marking Paint
Structured profile marking option for reflective, visible, and specialized traffic marking applications.
Fluorescent Coating
High-recognition coating option for warning, traffic attention, and safety guidance areas.
Colored Vertical Reflective Marking Paint
Reflective marking option for curbs, barriers, guardrails, tunnel edges, and vertical safety surfaces.
Project Support
VERDA offers product guidance, technical documents and samples, with support for distribution and private-label partnerships.
Road marking product selection Product sheets and documents Samples and application support Distributor and OEM discussion
Project Request
Use one project brief for quotation, product recommendation, sample discussion, product documents, or private label follow-up. This helps VERDA respond with a clearer traffic marking pathway.
Country, project type, buyer role, road location, estimated marking area, line width, line color, and expected schedule.
Road, parking lot, garage, industrial route, logistics yard, port, public site, colored surface, or vertical safety marking.
Asphalt, concrete, old marking, parking floor, vertical substrate, contamination, road temperature, humidity, and traffic load.
Distributor supply, contractor purchase, wholesale order, OEM/private label, packaging, sample, and product document requirements.
01Request a Quote
For price, quantity, shipping, samples, packaging, and purchasing discussion.
02Ask for Technical RecommendationFor substrate, product family, line profile, color, glass bead, equipment, or reopening schedule review.
03Send Project DetailsFor site photos, road surface, marking area, target market, product interest, and buyer role.