Floor coating systems for industrial plants, logistics warehouses, machine shops, hardware factories, and old floor renovation.
Industrial Floor Coating Solutions
VERDA supports floor protection projects for factories, warehouses, parking areas, ramps, clean rooms, food plants, electronics workshops, chemical areas, outdoor traffic lanes, and heavy-duty industrial environments.
Project Applications
We provide floor coating solutions tailored to your site’s use, traffic loads, moisture conditions, and chemical exposure, while addressing your cleaning, maintenance, and appearance requirements.
Wear-resistant, textured, anti-slip, and marking options for garages, parking lanes, ramps, driveways, and service corridors.
Self-leveling and waterborne systems for food factories, pharmaceutical plants, hospitals, cosmetics workshops, and precision areas.
Conductive floor systems for electronics, communication, computer rooms, precision machinery, instrumentation, and sensitive storage areas.
Floor systems for electroplating, battery, chemical, wastewater, acid and alkali neutralization, and chemical storage areas.
Road marking and colored anti-slip floor paint for bus lanes, sidewalks, greenways, tunnels, flyovers, and emergency stop areas.
System Selection
The VERDA floor range covers epoxy flat coating, solvent-free self-leveling, waterborne epoxy, anti-static, anti-corrosion, waterborne acrylic, polyurethane topcoat, traffic marking, and polyurethane mortar systems.
Primer + midcoat + topcoat floor systems Anti-slip and traffic marking surfaces Anti-static conductive floor protection Heavy-duty polyurethane mortar floors
Key Issues
Floor coating projects need careful review of the concrete base, moisture, surface strength, traffic intensity, chemical exposure, construction timing, and maintenance needs.
Weak or Dusty Concrete
Powdering, sanding, hollow areas, cracks, and weak surface layers may need grinding, repair, primer penetration, or base reinforcement.
Moisture & Negative Floor Risk
Ground-floor and underground floors may require moisture review and waterproof layer confirmation before coating.
Heavy Traffic & Impact
Forklifts, carts, vehicle lanes, machinery, and loading areas require systems selected for pressure, impact, wear, and maintenance cycles.
Slip, Lane, and Safety Control
Parking ramps, walkways, bus lanes, traffic paths, and wet floors may require textured anti-slip surfaces or marking paint.
Chemicals, Oil, and Cleaning
Food, chemical, battery, electroplating, and wastewater areas need attention to oil, acids, alkalis, salt, water, and routine cleaning.
Static Electricity
Electronics, communication, computer rooms, and precision workshops may require conductive primer, copper foil, and anti-static topcoat systems.
VERDA Pathways
We help you select suitable waterproofing products and systems for indoor wet areas, exposed roofs, water-retaining structures, and leak repairs, based on your project’s substrate and exposure conditions.
Epoxy Flat / Wear-Resistant Floor
For garages, driveways, workshops, warehouses, hardware factories, machine shops, and general industrial floors.
- Epoxy Penetrating Primer: EF-D15
- Epoxy Intermediate Coat: EF-Z40
- Epoxy Floor Topcoat: EM-M43 / EM-M47
- Epoxy Colored Sand Floor Paint: EC-3050
Solvent-Free Epoxy Self-Leveling
For high-cleanliness floors, dust-free rooms, food plants, hospitals, precision machinery, and renovation areas.
- Solvent-Free Epoxy Primer: EF-D10
- Solvent-Free Epoxy Intermediate: EF-D25
- Solvent-Free Floor Topcoat: EF-M80 / EF-M83
- Colored Sand Self-Leveling: EC-3050
Waterborne Epoxy Floor System
For humid environments, basements, food factories, electronics factories, logistics warehouses, and clean floor needs.
- Waterborne Epoxy Floor Primer: EF-WD130
- Waterborne Epoxy Floor Midcoat: EF-WZ608
- Waterborne Epoxy Floor Topcoat: EF-WM532
- Waterborne breathable and polyurethane finish options
Anti-Static Conductive Floor
For electronics, communication, computer rooms, precision machinery, instrumentation, powder, chemical, and aerospace-related areas.
- Epoxy Conductive Primer: EF-D401
- Epoxy Conductive Midcoat: EF-ZZ36
- Conductive Floor Topcoat: EF-M38 / EF-M39
- Copper Foil: TB-115
Anti-Corrosion Floor Coating
For electroplating plants, battery factories, chemical plants, wastewater treatment areas, neutralization pools, and chemical storage zones.
- Anti-corrosion flat coating pathway
- Anti-corrosion self-leveling pathway
- Vinyl anti-corrosion floor coating pathway
- Primer, mortar, putty, and topcoat system selection
Marking, Anti-Slip & PU Mortar
For bus lanes, sidewalks, outdoor corridors, toll station access roads, greenways, food hygiene areas, and heavy-duty industrial floors.
- Waterborne Road Marking Paint: WTP-RM100
- Acrylic Marking Paint: BAYD-F01
- Oil-Based Acrylic Primer / Paint: PA-D103 / PA-M305
- PU Mortar Self-Leveling Floor: VERDA-MF
Project Workflow
Clear guidance for waterproofing projects, from substrate assessment to final inspection.
Inspect the Base
Confirm concrete age, strength, flatness, hollows, cracks, dusting, sanding, old coating, contamination, moisture, and waterproof layer condition.
Grind, Clean & Repair
Sand or grind the floor, remove oil and wax, repair cracks or hollow areas, and clean dust before primer application.
Apply Primer
Select epoxy, solvent-free, waterborne epoxy, acrylic, conductive, or polyurethane primer according to system and substrate condition.
Build Midcoat / Mortar
Use intermediate coat, mortar layer, quartz sand, conductive layer, or polyurethane mortar layer when the project needs strength, leveling, or system thickness.
Apply Topcoat / Finish
Apply epoxy, waterborne epoxy, acrylic, polyurethane, anti-static, anti-slip, marking, or self-leveling topcoat according to the target finish.
Cure, Inspect & Maintain
Control layer interval, prevent contamination between coats, inspect uniform color and hollow-free finish, then follow maintenance guidance after handover.
Common Substrates
We recommend suitable waterproofing solutions based on your substrate type and surface condition.
Industrial plants, warehouses, parking areas, garages, service rooms, and production workshops.
Common base for commercial, industrial, and renovation floors requiring primer and leveling review.
Renovation projects may need adhesion testing, sanding, cleaning, and compatibility review before recoating.
Sloped areas, vehicle lanes, garage lanes, and traffic paths with anti-slip or marking requirements.
Moisture-prone floors where waterborne breathable or waterborne epoxy pathways may be considered.
Food, pharmaceutical, hospital, cosmetics, electronics, and precision manufacturing spaces.
Bus lanes, sidewalks, greenways, tunnels, flyovers, and road marking areas.
Floor-wall joints, drainage grooves, expansion joints, equipment perimeters, and local repair zones.
Project Scenarios
Waterproofing and leak repair solutions for kitchens, bathrooms, exposed roofs, water tanks, and pools.
Case Type 01
Garage & Parking Floor
For parking lanes, driveways, ramps, service areas, and vehicle circulation floors requiring abrasion resistance and clean marking.
Suggested path: Epoxy flat / anti-slip / marking system
Case Type 02
Clean Industrial Floor
For food, pharmaceutical, hospital, cosmetics, electronics, logistics, and dust-control floor applications.
Suggested path: Waterborne epoxy or self-leveling system
Case Type 03
Chemical & Wet Workshop
For chemical, electroplating, battery, wastewater, and storage areas requiring careful chemical and cleaning review.
Suggested path: Anti-corrosion floor system
Case Type 04
Outdoor Traffic Surface
For greenways, sidewalks, bus lanes, tunnels, access roads, road markings, and colored anti-slip pavement.
Suggested path: Acrylic / marking / colored anti-slip systemVerified Product Matrix
We help you select primers, waterproofing coatings, and repair materials suited to your substrate and project needs.
Epoxy Colored Sand Floor Paint
For colored sand self-leveling or decorative high-performance floor systems.
Epoxy Penetrating Primer
Primer option for epoxy floor systems and base adhesion support.
Epoxy Intermediate Coat
Midcoat layer for epoxy floor build-up, leveling, and system reinforcement.
Epoxy Floor Topcoat
Topcoat option for epoxy floor protection and finish appearance.
Epoxy Floor Topcoat
Topcoat option for epoxy floor protection and finish appearance.
Waterborne Road Marking Paint
For road marking, traffic lane, parking guidance, and line application needs.
Acrylic Marking Paint
For line marking, traffic direction, lane separation, and floor marking work.
Solvent-Free Epoxy Primer
Primer for solvent-free epoxy floor systems and self-leveling pathways.
Solvent-Free Epoxy Intermediate Coat
Intermediate coat for solvent-free epoxy floor build-up and leveling support.
Solvent-Free Floor Topcoat
Topcoat for solvent-free floor coating systems and seamless floor finishes.
Solvent-Free Floor Topcoat
Topcoat for solvent-free floor coating systems and seamless floor finishes.
Waterborne Epoxy Floor Primer
Primer for waterborne epoxy floor systems and moisture-prone project pathways.
Waterborne Epoxy Floor Intermediate Coat
Midcoat for waterborne epoxy floor systems and clean floor protection.
Waterborne Epoxy Floor Topcoat
Topcoat for waterborne epoxy floor systems, clean rooms, and industrial floors.
Epoxy Conductive Primer
Primer for anti-static and conductive floor system pathways.
Epoxy Conductive Intermediate Coat
Conductive midcoat for anti-static floor systems in sensitive environments.
Epoxy Conductive Floor Topcoat
Conductive topcoat option for anti-static floor protection.
Epoxy Conductive Floor Topcoat
Conductive topcoat option for anti-static floor protection.
Copper Foil
Conductive layer accessory for anti-static floor system construction.
Polyurethane Mortar Self-Leveling Floor
Heavy-duty floor pathway for demanding industrial environments.
Oil-Based Acrylic Floor Paint
Acrylic floor paint option for traffic, marking, and outdoor floor applications.
Oil-Based Acrylic Floor Primer
Primer option for oil-based acrylic floor paint systems.
Project Support
VERDA supports floor coating projects with product matching, samples, system discussion, product documents, branded packaging, distributor supply, and OEM/private label cooperation.
Floor system selection TDS and SDS on request Samples and color support Distributor and OEM discussion
Project Request
Use one project brief for quotation, technical recommendation, sample discussion, product documents, or private label follow-up. This helps VERDA respond with a clearer floor protection pathway.
Project type, country, target market, indoor/outdoor use, estimated area, expected schedule, and buyer role.
Factory, warehouse, parking, ramp, clean room, food plant, electronics workshop, chemical zone, road marking, or heavy-duty floor.
Concrete age, moisture, old coating, cracks, dusting, oil contamination, flatness, hollow areas, and repair needs.
Anti-slip, anti-static, anti-corrosion, waterborne, solvent-free, self-leveling, traffic marking, samples, TDS, SDS, packaging, or OEM needs.
01Request a Quote
For price, area, quantity, shipping, samples, and purchasing discussion.
02Ask for Technical RecommendationFor floor use, substrate, moisture, primer, midcoat, topcoat, or repair pathway review.
03Send Project DetailsFor floor photos, load condition, chemical exposure, anti-slip needs, product interest, and buyer role.